Download the driver version you want. Disconnect from the internet. Open Device Manager and locate the device you want to update. Double-click on it, or Right-click and select Properties from the context menu. This driver is necessary for the computer to connect to the i1. After installing the software, you should be able to plug your instrument into a USB port and have it be recognized by the computer. The installer is downloaded in compressed format and will automatically decompress if your system has a decompression utility.

• Download Cross Match Usb Devices Driver Download
• Free Usb Drivers Download
• Usb Device Drivers Windows 10

Before a device—or any service provider—can be used, a driver for it must be found and loaded into the kernel. The I/O Kit defines a flexible, three-phase matching process that narrows a pool of candidate drivers down to one or more drivers. The final candidate (or, if multiple candidates, the most eligible one) is then loaded and given the first opportunity to manage the device or service provider.

The matching process makes use of the matching dictionaries defined as XML key-value pairs in a driver's information property list. Each matching dictionary specifies a personality of the driver, which declares its suitability for a device or service of a particular type.

This chapter discusses driver personalities and the matching language that describes them. It then describes the matching process, which uses the information in the driver personalities to identify the most appropriate driver for a detected device. The chapter also briefly discusses the device-matching procedure that applications use for loading device interfaces. See Accessing Hardware From Applications for the complete details.

Driver Personalities and Matching Languages

Each device driver, considered as a loadable kernel extension (KEXT), must define one or more personalities that specify the kinds of devices it can support. This information is stored in XML matching dictionaries defined in the information property list (Info.plist) in the driver’s KEXT bundle. A dictionary in this sense is a collection of key-value pairs where the XML tags <key> and </key> enclose the key. Immediately following the key are the tags enclosing the value; these tags indicate the data type of the value; for example,

<integer>74562</integer>

would define an integer value.

Each matching dictionary is itself contained within the information property list’s IOKitPersonalities dictionary.

The dictionary values of a personality specify whether a driver is a candidate for a particular device. All values in the personality must match for the driver to be selected for the device; in other words, a logical AND is performed on the values. Some of the keys may take a list of space-delimited values, which are generally examined in an OR fashion. Thus you might have a “model” key for a certain PCI card driver personality that takes a list of model numbers, each identifying a supported model from a specific card vendor.

The specific keys that are required depend on the family. A driver for a PCI card, for example, can define a value that is checked against the PCI vendor and device ID registers. Some families, such as the PCI family, provide fairly elaborate matching strategies. For instance, consider this key-value pair:

This expression, which is used to match various Adaptec SCSI cards, consists of two compound values, each of which can be a valid match. To evaluate these values, the driver family reads the 32-bit vendor and device ID from the PCI card and masks it with the value to the right of each ampersand. The result of that operation is then compared with the value to the left of the ampersand to determine if there is a match.

Listing 4-1 shows a partial listing of a driver personality from the XML file for an Ethernet controller driver.

Listing 4-1 A partial listing of an XML personality for an Ethernet controller

As mentioned in Listing 4-1 every driver must include the IOProviderClass key with a value that identifies the nub to which the driver attaches. In very rare cases, a driver might declare IOResources as the value of its IOProviderClass key. IOResources is a special nub attached to the root of the I/O Registry that makes resources, such as the BSD kernel, available throughout the system. Traditionally, drivers of virtual devices match on IOResources because virtual devices do not publish nubs of their own. Another example of such a driver is the HelloIOKit KEXT (described in Creating a Device Driver with Xcode) which matches on IOResources because it does not control any hardware.

Important: Any driver that declares IOResources as the value of its IOProviderClass key must also include in its personality the IOMatchCategory key and a private match category value. This prevents the driver from matching exclusively on the IOResources nub and thereby preventing other drivers from matching on it. It also prevents the driver from having to compete with all other drivers that need to match on IOResources. The value of the IOMatchCategory property should be identical to the value of the driver's IOClass property, which is the driver’s class name in reverse-DNS notation with underbars instead of dots, such as com_MyCompany_driver_MyDriver.

Because a driver can contain multiple matching dictionaries, each one defining a different personality for the driver, the same driver code can be loaded for different devices. For purposes of competition, the I/O Kit treats each personality as if it were a driver. If, in any single personality, all of the properties required by the family match, the driver’s code is loaded and given a chance to run for that device.

Your driver can have more than one personality for a variety of reasons. It could be that the driver (as packaged in the KEXT) supports more than one type of device, or more commonly, multiple versions of the same type of device. Another reason might be that the driver supports similar devices, each of which is attached to the system on different buses; for example, Zip drives can be attached to USB, FireWire, SCSI, ATAPI, and other buses. Because each of these attaches to a different nub class, it has different matching values. The personalities of a driver can also range from device-generic to device-specific. The personalities of the AppleUSBAudio driver (Listing 4-2) illustrate this.

Listing 4-2 Driver personalities for the AppleUSBAudio driver

This matching dictionary defines three personalities: AppleUSBAudioControl, AppleUSBAudioStream, and AppleUSBTrinityAudioControl. In matching for a detected USB Trinity audio-control device, the AppleUSBTrinityAudioControl would be chosen; for any other audio-control device, the generic personality (AppleUSBAudioControl) would match.

One common property of personalities is the probe score. A probe score is an integer that reflects how well-suited a driver is to drive a particular device. A driver may have an initial probe-score value in its personality and it may implement a probe function that allows it to modify this default value, based on its suitability to drive a device. As with other matching values, probe scores are specific to each family. That’s because once matching proceeds past the class-matching stage, only personalities from the same family compete. For more information on probe scores and what a driver does in the probe function, see Device Probing

Driver Matching and Loading

At boot time and at any time devices are added or removed, the process of driver matching occurs for each detected device (or other service provider). The process dynamically locates the most suitable driver in /System/Library/Extensions for the device or service.

As described in Driver Matching in the chapter Architectural Overview the matching process is triggered when a bus controller driver scans its bus and detects a new device attached to it. For each detected device the controller driver creates a nub. The I/O Kit then initiates the matching process and obtains the values from the device to use in matching (for example, examining the PCI registers). Once a suitable driver is found for the nub, the driver is registered and loaded. That driver, in turn, may create its own nub (possibly through behavior inherited from its family), which initiates the matching process to find a suitable driver.

Driver Matching

When a nub detects a device, the I/O Kit finds and loads a driver for the nub in three distinct phases, using a subtractive process. In each phase, drivers that are not considered to be likely candidates for a match are subtracted from the total pool of possible candidates until a successful candidate is found.

The matching process proceeds as follows:

1. In the class matching step, the I/O Kit narrows the list of potential drivers by eliminating any drivers of the wrong class for the provider service (that is, the nub). For example, all driver objects that descend from a SCSI class can be ruled out when the search is for a USB driver.

2. In the passive matching step, the driver’s personality (specified in a driver’s XML information property list) is examined for properties specific to the provider’s family. For example, the personality might specify a particular vendor name.

3. In the active matching step, the driver’s probe function is called with reference to the nub it is being matched against. This function allows the driver to communicate with the device and verify that it can in fact drive it. The driver returns a probe score that reflects its ability to drive the device. See Device Probing for more information. During active matching, the I/O Kit loads and probes all candidate drivers, then sorts them in order of highest to lowest probe score.

The I/O Kit then chooses the remaining driver with the highest probe score and starts it. If the driver successfully starts, it is added to the I/O Registry and any remaining driver candidates are discarded. If it does not start successfully, the driver with the next highest probe score is started, and so on. If more than one driver is in the pool of possible candidates, the more generic driver typically loses out to the more specific driver if both claim to be able to drive the device.

Device Probing

During the active matching phase, the I/O Kit requests each driver in the pool of remaining candidates to probe the device to determine if they can drive it. The I/O Kit calls a series of member functions defined in the IOService class and overridden in some cases by the driver’s class. These functions, and the order in which they are called, are

These functions comprise the first part of a driver’s life cycle (see Driver Object Life Cycle in the chapter The Base Classes for the full story). Note that four of these functions form complementary pairs, one nested inside the other: init and free are one pair, and attach and detach are the other.

During active matching, the code of a candidate driver is loaded and an instance of the principal class listed in the personality is created. The first function invoked is init, which is the libkern equivalent of the constructor function for the class. For I/O Kit drivers, this function takes as its sole argument an OSDictionary object containing the matching properties from the selected driver personality. The driver can use this to identify what specific personality it’s been loaded for, determine what level of diagnostic output to produce, or otherwise establish basic operating parameters. I/O Kit drivers typically don’t override the init function, performing their initialization in later stages.

However, if you do override the init function—or almost any other function of the driver life cycle—you must take care to do two things. The first is to invoke your superclass’s implementation of the function. When you do this depends on the function; for example, in implementing init you should invoke the superclass’s implementation as the first thing, and in free you should invoke it as the last statement of the function. The second general rule is that you should undo in the second function of a pair what you’ve done in the first function; thus, if you allocate memory for any reason in init, you should free that memory in free.

Next, the attach function (which is bracketed with the detach function) is called. The default implementation of attach attaches the driver to the nub through registration in the I/O Registry; the default implementation of detach detaches the driver from the nub. A driver can override the default implementations, but rarely needs to do so.

After attach the probe function is invoked. The I/O Kit always calls a driver’s probe function if the driver’s matching dictionary passively matches the provider (the nub). A driver may choose not to implement probe, in which case IOService’s default implementation is invoked, which simply returns this.

The probe function takes as arguments the driver’s provider and a pointer to a probe score. The probe score is a signed 32-bit integer initialized to a value specified in the driver’s personality (or to zero if not explicitly initialized). The driver with the highest initial probe score is given the first chance to start operating the device. The purpose of the probe function is to offer drivers an opportunity to check the hardware and to modify their default probe scores as assigned in their personalities. A driver can check device-specific registers or attempt certain operations, adjusting its probe score up or down based on how well suited it is for the device it is examining. Whatever it finds, each driver must leave the hardware in the same state it was in when probe was invoked so the next driver can probe the hardware in its original state.

A driver, in its probe function, returns a driver object (IOService *) if the probe was successful and returns zero otherwise. The returned object is usually the driver itself, but the driver can return another driver that is more suited to the provider. The probe score is an in-out parameter, which probe can modify based on what it discovers about the device.

Driver Loading

After all drivers have probed the device, the one with the highest probe score is attached and its startfunction, which must be implemented by all drivers, is invoked. The start function initializes the device hardware and prepares it for operation. If the driver succeeds in starting, it returns true; the remaining candidate driver instances are discarded and the driver that started successfully continues operating. If the driver cannot initialize the hardware it must leave the hardware in the state it was in when start was invoked and return false. The failing driver is then detached and discarded, and the candidate driver with the next highest probe score is given a chance to start.

Some time after this occurs, all loaded drivers that are not currently in use are unloaded.

Device Matching

A user application that requires access to a device must first search for that device and then acquire the appropriate device interface to communicate with it. This process is known as device matching. Unlike driver matching, device matching searches the I/O Registry for a driver that is already loaded.

To perform device matching, follow these basic steps:

1. Establish a connection with the I/O Kit by obtaining a Mach port.

2. Define a dictionary that specifies the type of device to search for in the I/O Registry. The search can be refined by setting additional values in the dictionary. For example, a search for IOMedia objects can be narrowed down to find all ejectable media. You can find the values to match in the device header files (such as IOSCSIDevice.h or IOATADevice.h), by referring to the family-specific documentation, or by looking at the information property lists displayed in output from the I/O Registry Explorer application.

3. Obtain a list of all objects in the Registry that match your dictionary and choose the appropriate device.

4. Access the device you have chosen by obtaining a device interface for it. This step is explained more fully in Controlling Devices From Outside the Kernel

See the documentAccessing Hardware From Applications for a full description of device matching.

Copyright © 2001, 2014 Apple Inc. All Rights Reserved. Terms of Use | Privacy Policy | Updated: 2014-04-09

This article helps to fix an issue in which Windows 10 doesn't install specific drivers for USB audio devices on the first connection.

Original product version: Windows 10, version 1703
Original KB number: 4021854

Symptom

When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver.

Cause

This issue occurs because the USB audio 2.0 driver (usbaudio2.sys) isn't classified as a generic driver in Windows 10 Version 1703. Therefore, the system assumes that a compatible, nongeneric driver is installed for the device even though the driver is generic.

This issue also causes Windows 10 Version 1703 to postpone the search for other compatible drivers through Windows Update that typically occurs immediately after you install a new device.

Resolution

To fix this issue, use one of the following methods.

Method 1

To resolve this issue, install update 4022716.

Method 2

If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10.

Method 3

If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device.

Note

Download Cross Match Usb Devices Driver Download

See the device manufacturer's user guide for specific instructions about how to install the driver.

Method 4

If the driver isn't distributed through Windows Update, you can manually reinstall the driver. To do this, follow these steps:

Free Usb Drivers Download

1. Install the device-specific driver (see Method 2).
2. Open Device Manager.
3. Right-click (or tap and hold) the name of the device, and then select Uninstall.
4. Restart the computer.

Usb Device Drivers Windows 10

When it restarts, Windows will try to reinstall the device by using the device-specific driver.